3D Printer UCAN Board Based on STM32F072 USB to CAN Adapter Support with for CAnable / for CandleLight / Klipper Firmwar
Description UCAN is a small low cost open source USB to CAN adapter compatible with CANable hardware The UCAN enumerates as a virtual serial port on the computer and acts as a serial line for the CAN bus interface With the alternativeCandlelight firmware UCAN is enumerated as the native CAN interface on Linux The UCAN adapter is compatible with ARM based embedded platforms such as Raspberry Pi Raspberry Pi Zero ODROID BeagleBone etc At the same time it can also be used as USB to CAN application on Klipper Specifications Based on STM32F072 Type C USB socket Supports CAN2 0A and B baud rates up to 1M Compatible with CANable Support with CAnable for CandleLight Klipper firmware 3 pin screw terminal CANH CANL GND Jumper to enter bootloader for firmware updates Onboard 120R termination default or Jumper to enable disable terminationPackage Include 1x UCAN Board
![[EU/US Direct] Mingda Magician X2 3D Printer 16-Point Auto Leveling Dual Gears Direct Extruder](https://www.getdealshive.com/wp-content/uploads/2024/08/3c3b539b-0cca-4702-a8bd-e932c39c8576-336x220.jpg)
