Darwin 5.8Hz 40CH 25/200/400/600mW FPV Transmitter SmartAudio 3.5g VTX for CineApe 25 RC Drone
DarwinFPV 600mW VTX is a light weight small size high quality 25 600mW VTX it provides optional 25 200 400 600mW output power integrated 4Pin socket plug and play is very convenient The VTX settings can be adjusted through the flight control that is the transmitted power frequency band and channel Features 600mW power it is suitable for short to medium range flight and performance wellin stability 4 power channels adjustable 25mW 200Mw 400mW 600mW DC5V input the power consumption is only 600mA it can be powered directly from the flight control 5V VTX control protocol SmartAudio support OSD parameter tuning Specifications Name DarwinFPV 600mW VTXOutput Power 25 200 400 600mW adjustable Frenquency 5 8Hz 40portPower Supply Voltage Range 5VWeight 3 5gPitch 28 15mm length width Protocol SmartAudioIndicator Light Description Frequency and Power Control Method Adjust VTX frequency and power via Betaflight①Connect the RX white line of VTX to the TX signal line or SOFTSERIAL1 signal line of the FC spare UART port ②Select the port tab enable the TBS SmartAudio function setting of the connected port and save it The above figure takes the TX signal line as an example SOFTSERIAL1 is the same just select the TBS SmartAudio function according to the corresponding port ③ After entering the VTX parameter adjustment interface select the desired frequency and power and then save to save and exit Packing List 1 x DARWINFPV 600mW VTX1 x Spare Screw Pack1 x 3cm
