JHEMCU F405 Wing INAV Flight Controller Built-in Barometer Gyroscope OSD Blackbox BEC for RC Airplane Fixed-Wing
Overview The main control uses F405 chip 1MB FLASH rich interface full featured Built in TF card holder barometer gyroscope OSD reserved interface socket can be inserted or welded With high current PDB board built in ammeter detection Default 5V BEC servo output 8A can also be set to 6V 6 5A and 7 4V 6A servo power supply through the jumper pads of the PDB 5V BEC is also integrated on the PDB to power the flight controller and 9V BEC to power the mapping can be switched to 12V There is an additional 3 3V LDO reserved There is a separate 5V BEC on the LED board that can be connected to four WS2812 strips and the control signal is provided by the LED Strip on the F405 The extended USB interface board has a BOOT button and a 110 dBm buzzer with a switch to turn it off Note Since the 6P plug line of the USB interface board and the line of the DJI O3 sky end are both 6P when connecting be sure to look at the type of line don t plug in the wrong way to avoid burning the flight control or DJI O3 the 6P line of the USB board is the one with the green color in it Specifications CPU STM32F405RGSensor ICM 42688 PSize 54 36 16MMFirmware version INAV JHEMCUF405WING HEXBlack box self provided TF cardBarometer SupportOSD SupportIIC SupportUART 6BEC 5V 8A for servo switchable 6V 6 5A 7 4V 6A 5V 2 5A for flight control 9V 2A for mapping switchable 12V 1 8A 3 3V LDO 450MAMapping Support analog mapping support DJI O3 and other HD sky sideReceiver
